Bench Tools

Myxis Shine Brite

Formulated for repair operations but safe enough for the retail market, Myxis Shine Brite is a jewelry cleaner suitable for use on all jewelry and most gemstones. It is designed to clean the most difficult jewelry items, such as mesh and rope chains, diamond bracelets, and cluster rings. Sold in powder form, Myxis Shine Brite melts away dirt and grime without ultrasonic cleaning. It rinses away in warm water or light steam. Contact: Stuller Inc., 302 Rue Louis XIV, Lafayette, LA 70508; 1-800-877-7777; fax 800-444-4741; e-mail info@stuller.com; www.stuller.com. MJSA Member

 

PUK 3 Precision Welders

Two new models of PUK low-heat spot welding machines are available. Designed for permanent welding and tack welding prior to soldering, the PUK 3 Professional and PUK 3 Professional Plus are suitable for use on all precious metal alloys as well as stainless steel, titanium, bronze, copper, and tin alloys. The PUK 3 Professional offers modeled impulses with intelligent energy distribution for welding softly and prolonging electrode life. When fusing metals at angles and in deep areas, a special setting shortens impulse times to increase weld quality and strength. A micro mode permits micro-welding of sheet metal as thin as 0.1 mm.

In addition to the features of the PUK 3 Professional, the PUK 3 Professional Plus offers increased controller power, finer setting ranges, and five program slots for saving frequently used setting combinations. Both models include a stainless steel controller, a Mezzo stereomicroscope, a welding handpiece, a set of 10 reversible electrode tips, cross-locking electrode tweezers, flat electrode pliers, an electrode clamp, a diamond disc for cleaning tips, and a 10-foot gas hose. Contact: Gesswein, 255 Hancock Ave., Bridgeport, CT 06605; 1-203-366-5400; fax 366-3953; e-mail info@gesswein.com; www.gesswein.com. MJSA Member

DRM 130 Power Rolling Mill

Suitable for continuous operation, the DRM 130 is a double-sided power rolling mill for use with flat stock and wire stock. New safety features include bars in front of the rollers, two emergency stop buttons, and guards that cover the end rollers. The mill has a cast iron gear box and offers variable speed (from 0 to 30 rpm), two sets of extension rollers, and a large, easy-to-read calibrated disc that gives the exact roll measurement. The mill measures 54 cm high by 83 cm wide by 39 cm deep (21.6 inches by 33.2 inches by 15.6 inches). Contact: Durston Rolling Mills, Hospital Hill, Chesham, Bucks HP5 1P5, United Kingdom; 44-1494-793244; fax 44-1494-792966; e-mail md@durston.com; www.durston.com.

i500A Steam Cleaner

Designed to quickly clean away polishing compounds, fingerprints, soap spots, and dirt, the i500A Professional Jewelry Steam Cleaner features a ceramic terminal block and an all stainless steel tank to eliminate the chance of rust. Designed to provide up to four hours of continuous steam, the cleaner runs on tap water and offers a water capacity of 0.66 gallon (2.5 liters), an operating pressure of 50 psi, a pressure gauge manometer, an electronic foot pedal, and an automatic shut-off with a low-water indicator light. Operating on 120 volts, the i500A weighs 13 lbs. (5.9 kg) and measures 10.5 inches high by 9.25 inches wide by 16 inches deep (26.7 cm by 23.5 cm by 40.6 cm). Contact: Reliable Corp., 5-100 Wingold Ave., Toronto, Ontario M6B 4K7, Canada; 1-800-268-1649 or 1-416-785-0200; fax 416-785-7038; www.reliablecorporation.com. MJSA Member

i700A/i702C Steam Cleaners

With a water capacity of 2.37 gallons (9 liters), the i700A and i702C steam cleaners are designed to remove polishing compounds, fingerprints, soap spots, and dirt. Operating on 120 volts, both cleaners offer an operating pressure of up to 70 psi, Ranco pressure control, an adjustable steam nozzle with an electronic foot pedal, a built-in spare element, a pressure gauge manometer, and an automatic shut-off with a low-water indicator light. The i702C features a steam gun and two built-in solenoid valves. Both units have a ceramic terminal block and an all stainless steel tank. Each weighs 31 lbs. (14 kg) and measures 20.5 inches high by 14 inches wide by 12.5 inches deep (52.1 cm by 35.6 cm by 31.8 cm). Contact: Reliable Corp., 5-100 Wingold Ave., Toronto, Ontario M6B 4K7, Canada; 1-800-268-1649 or 1-416-785-0200; fax 416-785-7038; www.reliablecorporation.com. MJSA Member

Preform Sizing Stock

An updated feature of the Preform Ring Sizing System, Preform Sizing Stock is now available in four thicknesses (1.2 mm, 1.5 mm, 1.75 mm, and 2 mm). Developed to eliminate pitting, improve joint quality, and decrease finishing time, the stock is shaped to match the curvature of a ring shank, providing a flush fit and locking the stock in place. Currently available in all popular metals, the stock is pre-measured to size up a ring one-half to three-and-a-half sizes in half-size increments. Contact: Stuller Inc., 302 Rue Louis XIV, Lafayette, LA 70508; 1-800-877-7777; fax 800-444-4741; e-mail info@stuller.com; www.stuller.com. MJSA Member

Mettler Toledo Legal for Trade Carat Scales

Featuring a metal housing, a compact draft shield, protective cover, and a backlit display, the JB and JB Fact scales are now available in two new models: the 703JB and 703JBF. Both models have a capacity of 700 carats/140 grams and are certified as “legal for trade,” allowing sales to be made based on measured weight. The 703JBF features a vibration adapter that allows the balance to be adjusted to the weighing environment, and FACT (Fully Automatic Calibration Technology), which automatically recalibrates the scale whenever temperature changes might affect weighing accuracy. Contact: Kassoy LLC, 101 Commercial St., Ste. 200, Plainview, NY 11803; 1-800-452-7769; fax 516-942-0402; e-mail sales@kassoy.com; www.kassoy.com. MJSA Member

Burs

Designed to exceed ISO specifications, these FOX burs are made of tungsten vanadium steel for quality cutting. Packaged six to a box, the burs are available in a variety of sizes in the following new styles: cone wave cut, twist drill, bearing cutter, fast champion cut, and wheel. Contact: FOX Germany, 2245 E. Colorado Blvd., #104/240, Pasadena, CA 91107; 1-877-438-2877 or 1-626-791-4327; fax 626-794-0866; www.foxburs.com. MJSA Member

MetalMaster Polishing Wheels and Rods

Suitable for use on any metal surface, including stainless steel, titanium, gold, silver, and platinum, MetalMaster polishing wheels and rods are designed to last two to six times longer, produce less dust, hold their shape better, and work faster than other rubber-bonded abrasives. The wheels and rods contain an aluminum oxide grain that makes them suitable for light deburring, cleaning, scratch removal, smoothing of seam lines, and removal of rust, corrosion, and scale. Contact: The Foredom Electric Co., 16 Stony Hill Road, Bethel, CT 06801; 1-203-792-8622; fax 203-796-7861; e-mail info@foredom.com; www.foredom.com. MJSA Member

V-Stone Abrasives

Designed to last four to eight times longer than standard aluminum oxide and silicon carbide mounted stones, V-Stones are a line of self-sharpening abrasives that feature vitrified, aluminum oxide grain and a hard, porous bond that allows them to run cool. Suitable for cutting both hard and soft metals, including titanium, stainless steel, tool steel, pewter, and brass, V-Stones are available in 3/32 inch and 1/8 inch shanks and in a variety of 40/60 and 80 grit shapes. Contact: The Foredom Electric Co., 16 Stony Hill Road, Bethel, CT 06801; 1-203-792-8622; fax 203-796-7861; e-mail info@foredom.com; www.foredom.com. MJSA Member

Hammers

A new line of Fretz hammers is available for jewelry forming and small metalsmithing projects. Small versions of full-size silversmithing hammers, they are made of 420 hardened stainless steel and have rosewood handles. The hammers measure 9 inches long and are available in five styles: planishing (with a 72.5 mm long head), wide raising, narrow raising, large embossing, and small embossing. Contact: Fretz Design LLC, 20 Elm St., P.O. Box 1010, Bucksport, ME 04416; 1-207-469-2700; fax 469-9550; e-mail info@fretzdesign.com; www.fretzgoldsmiths.com.